• 無銹

• 無鉆孔

• 無膠水

• 易換位

• 可反復粘帖

• 墻面無異物殘留

• 避免牙刷頭交叉接觸

• 避免臺面擁擠

• 不積水結垢，易清理

• 靜音

• 吸附面廣

• 低碳環保

 

• No rust

• No drilling

• No glue

• Easy transposition

• Repeatedly paste well

• No Sticky substance left on the wall

• Avoid toothbrush head cross-contact

• Avoid wash table crowded

• No ponding, easy to clean

• Mute

• A wide range of adsorption

• Low-carbon environmental protection

如何裝上

適用表面：瓷磚、玻璃、大理石、金屬、木質、塑膠、乳膠漆墻面、油漆表面、硬質皮革。

 

1.使用清水（或肥皂水）徹底清潔并風干墻面。

2.(撕下吸附面保護膜后）自中間向外，反復按壓產品的整個表面，將空氣擠出使其緊貼墻面（重要）。

3.按壓完成后24小時內，不宜使其工作，使其達到最大吸附值。（注意：吸附面是經過特殊處理的表面層，一經觸碰墻面即不易移動，如需調整位置，務必按照“如何卸下”和“重新吸附”步驟操作）

 

如何卸下

1.使用塑料卡片（如購物卡、電話卡等）插入吸附面和墻面之間，緩慢將吸附面逐漸擠下（重要）。

2.切忌使用銳利物品，以免損壞吸附面。

 

重新吸附

1.使用清水（或肥皂水）清潔吸附面。

2.風干吸附面。

3.重復“如何裝上”的動作。

 

How to install

Applicable surface: tiles, glass, marble, metal, wood, plastic, paint walls, painted surfaces, hard leather.

1.Clean and dry wall thoroughly with water (or soapy water).

2.(After tearing the protective film of adsorption surface) from the center to outside, Repeatedly pressing the entire surface of the product to make the air out and make it stick to the wall tightly(important).

3.Within 24 hours after completion of pressing, not make it work, to let it get the maximum adsorption. (Note: The suction surface is specially treated surface layer, a wall that is not easy to move through touch, for adjusting the position, be sure to follow "how to remove" and "re-adsorption" steps)

 

How to remove

1.Using a plastic cards (such as shopping cards, phone cards, etc.) to insert between the wall and the suction surface and slowly squeeze the suction surface down(important).

2.Never use sharp objects to avoid damage to the suction surface.

 

Re-adsorption

1.Clean the suction surface with water (or soapy water).

2.dry adsorption surface.

3.Repeat "How to install" action.

主要材料：硅膠

邵氏硬度：70度

顏色：橘、粉、綠、灰

工作溫度：-10~60 ℃

凈重：12.5g

尺寸：60x38x26mm

包裝：掛式吸塑包裝（2個裝）

 

Main Material: Silicon

Shore Hardness: 70 degree

Color: Orange,Pink,Green,Grey

Operating Temperature: -10~60 ℃

Net Weight: 12.5g

Dimension: 60x38x26mm

Package: hanging skin packing (2pcs per packing)